Click-On Inline Traps
The carrier gas must contain less than 1 PPM of oxygen, moisture or other contaminants to prevent column degradation, increase lifetime and decrease stationary phase bleed. Click-On Inline traps will definitely contribute to achieve this purity and to obtain chromatographic results free of ghost peaks, allowing the analysis of trace compounds. It will improve system performance, reduce time and cost in equipment maintenance. The advantages of using gas line purifiers with Click-On connectors allow for in-line cartridge exchange without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need to loosen and tighten fittings every time a trap is changed and your system will not be contaminated in the process. Make-up gas should also be free of contaminants such as water and hydrocarbons to avoid noise in the detector. Features • High Impurity Holding Capacity. • Trap Provides 99.9999% purity Exhaust Gas. • Click-On connectors facilitate quick and safe cartridge replacement • Polymeric trap with glass interior prevents diffusion of contaminants. • Steel trap with increased retention capacity. • Trap exhausted indicator. · All materials used are recyclable or renewable. · Specific traps for helium and hydrogen available. · Each filter is managed by a unique serial number.
