Fluorometer Micro Cuvettes
Starna Cells for Fluorometers Fluorometer cells have at least three windows clear. They are designed for use in a fluorometer which passes an excitation beam through the cell and then reads the fluoresence emission at a 90 degree angle. There are many variations on this theme and we make a wide range of cells to allow you to use everything from normal full volume cells to very small volumes.
Type 583-F Fluorimeter flow
- Three polished windows.
- M6 screw-in connections.
- Cells with a Z height of 20mm have an overall height of 40mm.
Type 11.Open Top
- Four windows and base polished.
Type 22 stopper top
- All sides and base polished.
Type 23-. Fluorimeter. Micro, with stopper
- Four windows and base polished.
- This range of micro fluorimeter cells is specially designed to be usedwith the FCA adaptors. The appropriate adaptor for the path lengthcorrectly aligns the cell in a standard 12.5mm square cell holder tomaximise excitation and emission energy utilisation.
Type 3. Fluorimeter. Micro.
- Four windows polished.
- This range of micro fluorimeter cells is specially designed to be usedwith the FCA adaptors. The appropriate adaptor for the path lengthcorrectly aligns the cell in a standard 12.5mm square cell holder tomaximise excitation and emission energy utilisation.
Type 52. with lid. Dual Path Length or Fluorimeter
- All windows and base polished
- May be used as dual path length absorption cells or fluorimeter cells
- Volumes equivalent to micro and semi-micro cells depending on internal width.
Type 73-F. Fluorimeter flow cells
- Three polished windows.
- Inlet/outlet tubes - 2 I.D, 4 O.D, 16mm long intended for push-onflexible tubing.
- Cells with a Z height of 8.5mm have an overall height of 40mm.
Type 73-F/SS. Fluorimeter flow cells
- Three polished windows.
- Stainless steel inlet/outlet tubes.
- Cells with a Z height of 8.5mm have an overall height of 38.5mm.
