Fluorometer Macro Cuvettes
Starna Cells for Fluorometers Fluorometer cells have at least three windows clear. They are designed for use in a fluorometer which passes an excitation beam through the cell and then reads the fluoresence emission at a 90 degree angle. There are many variations on this theme and we make a wide range of cells to allow you to use everything from normal full volume cells to very small volumes.
Fluorimeter Macro Cuvettes Type 24 Triangular stopper top
- Fits 12.5mm square cell holder.
- Three windows and base polished.
Type 61, 62, 63. -F Water-jacketed cells
- Inlet/outlet tubes - 2 I.D, 4 O.D, 10mm long intended for push-on flexible tubing.
- Base window 4.5mm x 4.5mm
Type 126-F Fluorimeter
- four windows and base polished.
- Reservoir has ground cone with evacuation hole to line up with socketoutlet tube.
- Reservoir volume 1.5ml.
- Evacuation tube is 4mm I.D., 6mm O.D. and 30mm long.
- Socket assembly can be fused to other rectangular cells on request
Type 128-F Fluorimeter
- four windows and base polished.
- Reservoir has ground cone with evacuation hole to line up with socketoutlet tube.
- Reservoir volume 1.5ml.
- Evacuation tube is 4mm I.D., 6mm O.D. and 30mm long.
- Socket assembly can be fused to other rectangular cells on request
Type 23. Fluorimeter with stopper(s). Macro/Standard Rectangular
- four windows and base polished.
- Closed by PTFE stopper(s), providing a liquid-tight seal.
Type 3. Fluorimeter. Macro/Standard Rectangular
- Polyethylene vaned lid available on request for 10mm cells only, providing a liquid-tight seal.
- Open top, with non-sealing PTFE cover.
- Four windows and base polished.
